Asus P5LP-LE - Installing a DDR2 DIMM; Removing a DDR2 DIMM

ASUS P5LP-LE (Emery2-UL8E)ASUS P5LP-LE (Emery2-UL8E)
ASUS P5LP-LE (Emery2-UL8E)ASUS P5LP-LE (Emery2-UL8E)
ASUS P5LP-LE (Emery2-UL8E)
77
77
7
3.23.2
3.23.2
3.2
Installing a DDR2 DIMMInstalling a DDR2 DIMM
Installing a DDR2 DIMMInstalling a DDR2 DIMM
Installing a DDR2 DIMM
Unplug the power supply before adding or removing DIMMs or other system
components. Failure to do so can cause severe damage to both the
motherboard and the components.
To install a DIMM:
1. Unlock a DIMM socket by
pressing the retaining clips
outward.
2. Align a DIMM on the socket such
that the notch on the DIMM
matches the break on the
socket.
3. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the DIMM
is properly seated.
3.33.3
3.33.3
3.3
Removing a DDR2 DIMMRemoving a DDR2 DIMM
Removing a DDR2 DIMMRemoving a DDR2 DIMM
Removing a DDR2 DIMM
To remove a DIMM:
1. Simultaneously press the retaining
clips outward to unlock the DIMM.
2. Remove the DIMM from the socket.
• A DDR2 DIMM is keyed with a notch so that it fits in only one direction.
Do not force a DIMM into a socket to avoid damaging the DIMM.
• The DDR2 DIMM sockets do not support DDR DIMMs. Do not install DDR
DIMMs to the DDR2 DIMM sockets.
Unlocked retaining clipUnlocked retaining clip
Unlocked retaining clipUnlocked retaining clip
Unlocked retaining clip
DDR2 DIMM notchDDR2 DIMM notch
DDR2 DIMM notchDDR2 DIMM notch
DDR2 DIMM notch
Support the DIMM lightly
with your fingers when
pressing the retaining clips.
The DIMM might get
damaged when it flips out
with extra force.
DDR2 DIMM notchDDR2 DIMM notch
DDR2 DIMM notchDDR2 DIMM notch
DDR2 DIMM notch
1
2
3
1
2
1