5-46 Chapter 5: Software support
Deleting a RAID array
To delete a RAID array
1. From the Array List screen, use the up or down arrow keys to select a RAID
array, and then press <Enter>. The RAID Array details appear.
A new set of navigation keys is displayed on the bottom of the screen.
2. Press <D> to delete a RAID array. The following conrmation message
appears.
4. If you deleted all existing arrays, the Dene a New Array screen appears
again.
Take caution in using this option. All data on the RAID drives will be lost!
3. Press <Y> to delete array or press <N> to cancel.
[R] Rebuild [D] Delete [C] Clear MBR [ENTER] Return
Array 4 : NVIDIA MIRROR 149.04G
- Array Detail -
RAID Mode: Mirrored
Striping Width: 1 Striping Block: 64K
Port Index Disk Model Capacity
0.0 0 WDC1600AAJS-22PSA0 149.05G
0.1 1 WDC1600AAJS-22PSA0 149.05G
Delete array?
[ENTER] OK [ESC] Cancel
To Next Page
Loading...
