Asus P5QPL-VM EPU - Advanced Menu; Jumperfree Configuration

2-10 Chapter 2: BIOS setup
2.4 Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Take caution when changing the settings of the Advanced menu items. Incorrect eld
values can cause the system to malfunction.
2.4.1 JumperFree Conguration
AI Overclocking [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal frequency.
Select either one of the preset overclocking. Conguration options: [MANUAL] [Auto]
[Overclock Prole]
The following two items appear only when you set the AI Overclocking item to [MANUAL].
FSB / CPU External Frequency Synchronization
CPU Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and PCI bus. The
value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to adjust the CPU
frequency. You can also key in the desired CPU frequency using the numeric keypad. The
values range from 200 to 800. Refer to the table below for the correct Front Side Bus and
CPU External Frequency settings.
Front Side Bus CPU External Frequency
FSB 1333 333MHz
FSB 1066 266MHz
FSB 800 200MHz
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
JumperFree Conguration
CPU Conguration
Chipset
Onboard Devices Conguration
USB Conguration
PCIPnP
Adjust system
frequency/voltage
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.