12
Installation manual
English
Reinstalling the front panel assembly and
side cover
To reinstall the front panel assembly and side cover:
1. Insert the front panel assembly hinge-like tabs to the holes on the left side of
the chassis.
2. Swing the front panel assembly to the right, then insert the hooks to the
chassis until the front panel assembly ts in place.
3. Insert the six side cover hooks into the chassis tab holes .
4. Push the side cover to the direction of the front panel until it ts in place.
5. Secure the cover with two screws you removed earlier.
Air duct
5
5
3
4
1
2
1
1
2
2
2
Chassis tab holes
1
2
1
To Next Page
Loading...
