Asus P6T WS PRO - ASUS O.C. Profile

3-42 Chapter 3: BIOS setup
3.8.3 ASUS O.C. Prole
This item allows you to store or load multiple BIOS settings.
Add Your CMOS Prole.
Allows you to save the current BIOS le to the BIOS Flash. In the Name sub-item,
type your prole name and press <Enter>, and then choose a prole number to
save your CMOS settings in the Save To sub-item. You can save two (2) CMOS
proles.
Load CMOS Prole.
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press
<Enter>, and choose a prole to load.
Start O.C. Prole
Allows you to run the utility to save and load CMOS. Press <Enter> to run the
utility.
ASUSTek O.C. Prole Utility V1.30
Current CMOS
Restore CMOS
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
PATH: A:\
BOARD: P6T-WS PRO
VER: 0201
DATE: 09/18/2008
BOARD: Unknown
VER: Unknown
DATE: Unknown
• This function can support devices such as a USB ash disk or a oppy disk
with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
the system boot failure!
BIOS SETUP UTILITY
Tools
O.C. PROFILE Conguration
O.C. Prole 1 Status : Default-Prole
O.C. Prole 2 Status : Default-Prole
Add Your CMOS Prole.
Name : [Default-Prole]
Save To : [Uninstalled]
Load CMOS Prole.
Load From : [Blank]
Start O.C. Prole
Save BIOS settings
to Prole 1