Asus P6T WS PRO - Creating a Raid 0 or Raid 1 Set

ASUS P6T WS Professional 4-59
Creating a RAID 0 or RAID 1 set
To create a RAID set:
1. From the utility menu bar, select RAID > Create array.
2. Press <Enter>. The screen shows the disks you can add to make up the
RAID set. Use the arrow key to select a disk and press <Enter> or <Space>
to include this disk in the array.
3. After you have selected the desired disks, select
NEXT
to create array.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection] [Controller] [ Devices ] [ RAID ]
RAID Cong
Create array
Delete array
Spare Management
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection] [Controller] [ Devices ] [ RAID ]
RAID Cong
Select free disks to create
ID Port Disk Name Size Max Speed Status
0 0 SAS : ST336754SS 36.6GB SAS 3.0 FREE
1 1 SAS : ST336754SS 36.6GB SAS 3.0 FREE
NEXT