Asus P6T6 WS Revolution - Page 148

4-40 Chapter 4: Software support
Restoring to factory settings
In the rare case that the system settings become corrupted, you can restore
Express Gate to its factory settings.
To restore Express Gate to factory settings
1. Click
Conguration Panel in the LaunchBar.
2. In the Conguration Panel, click
Environment Settings.
3. In the
General tab, click Restore. A conrmation dialog box will open. Click
Yes to immediately restart Express Gate to nish clearing system settings. All
bookmarks, network settings, and other changes you made will be cleared.
The rst-time Wizard will run again when you enter the Express Gate
environment after clearing its settings.
Conguring Express Gate in BIOS Setup
Enter BIOS setup by clicking Exit on the Express Gate First Screen, and then
press the <Del> key during POST. Express Gate conguration options are under
the Tools menu. See chapter 3 for details.
The BIOS setup screens shown in this section are for reference purposes only,
and may not exactly match what you see on your screen.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
ASUS EZ Flash 2
Express Gate [Enabled]
Enter OS Timer [10 Seconds]
Reset User Data [No]
ASUS O.C. Prole
AI NET 2