Asus P6T6 WS Revolution - Using a USB floppy disk drive

ASUS P6T6 WS Revolution 4-63
4.5.4 Using a USB oppy disk drive
Due to OS limitation, Windows
®
XP may not recognize the USB oppy disk drive
when you install the RAID driver from a oppy disk during the OS installation.
To solve this issue, add the USB oppy disk drive’s Vendor ID (VID) and Product
ID (PID) to the oppy disk containing the RAID driver. Refer to the steps below:
1. Using another computer, plug the USB oppy disk drive, and insert the oppy
disk containing the RAID driver.
2. Right-click
My Computer on
the Windows
®
desktop or start
menu, and then select Manage
from the pop-up window.
or
3. Select Device Manager. From the
Universal Serial Bus controllers,
right-click xxxxxx USB Floppy,
and then select Properties from the
pop-up window.
4. Click Details tab. The Vendor ID
(VID) and Product ID (PID) are
displayed.
5. Browse the contents of the
RAID driver disk to locate the le
txtsetup.oem.
6. Double-click the le. A window
appears, allowing you to select the
program for opening the oem le.
The name of the USB oppy
disk drive varies with different
vendors.