Asus P7H55-M - BCLK Frequency [XXX]; PCIE Frequency [100]; DRAM Frequency [Auto]; QPI Frequency [Auto]

2-14 ASUS P7H55-M/USB3
The following two items appear only when you set the Ai Overclock Tuner item to
[Manual], [D.O.C.P.] or [X.M.P.].
2.4.5 BCLK Frequency [XXX]
Allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys to adjust the
value. You can also type the desired value using the numeric keypad. The values range from
80 to 500.
2.4.6 PCIE Frequency [100]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE
frequency. The values range from 100 to 200.
2.4.7 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency.
Conguration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz]
The DRAM Frequency conguration options vary with the BCLK Frequency item settings.
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.4.8 QPI Frequency [Auto]
Allows you to set the QPI operating frequency.
Conguration options: [Auto] [4270MHz] [4800MHz]
2.4.9 OC Tuner Utility
OC Tuner automatically overclocks the CPU and DRAM frequency and voltage. Press [Enter]
to start auto-tuning. C-State will be disabled automatically in about ve minutes.
2.4.10 OC Tuner Limit Value
Conguration options: [Turbo Prole]
2.4.11 DRAM Timing Control [Auto]
The items in this menu allow you to set the DRAM timing control features.
The conguration options for some of the following items vary depending on the DIMMs
you install on the motherboard.
1st Information: 9-9-9-24-4-53-9-7-20
The values vary depending on your settings of the following sub-items:
DRAM CAS# Latency [Auto]
Conguration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] ~ [11 DRAM Clock]
DRAM RAS# to CAS# Delay [Auto]
Conguration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] ~ [15 DRAM Clock]