7-2
Chapter 7: Multiple GPU support
Chapter 7
7.1.2 Setting up your display
LucidLogix Virtu MVP solution comes with two distinct modes that allows you to enjoy better
graphics either from your built-in video output (i-Mode) or from a discrete graphics card (d-
Mode).
i-Mode
To use LucidLogix Virtu MVP in i-Mode, the display must be connected to the onboard video
output.
Ensure to set the Primary Display to iGPU in BIOS to activate i-Mode support.
d-Mode
To use LucidLogix Virtu MVP in d-Mode, the display must be connected to the installed
graphics card.
• Ensure to set the Primary Display to PCIE or PCIE/PCI in BIOS to enable d-Mode
support.
• d-Mode is recommended for an enhanced 3D gaming performance.
The motherboard’s IO ports and discrete graphic card is for reference only and may vary in
different models.
d-Mode (VGA output from
discrete graphics card)
i-Mode (VGA output
from motherboard)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
