Asus P8Z77 WS - Installing Four SLI-Ready Graphics Cards

5-6 Chapter 5: Multiple GPU technology support
Chapter 5
5.2.4 Installing four SLI-ready graphics cards
1. Prepare four SLI-ready graphics cards.
2. Insert the four graphics card into the PCIEX16 slots. If your motherboard has more
than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the
PCIEX16 slots recommended for multi-graphics card installation.
3. Ensure that the cards are properly seated on the slots.
4. Align and rmly insert the 4-Way SLI bridge connector to the goldngers on each
graphics card. Ensure that the connector is rmly in place.
5. Connect four independent auxiliary power sources from the power supply to the four
graphics cards separately.
6. Connect a VGA or a DVI cable to the graphics card.
4-Way SLI bridge