Asus P8Z77 WS - System Agent Configuration

ASUS P8Z77 WS
3-25
Chapter 3
3.5.4 System Agent Conguration
Memory Remap Feature [Enabled]
Allows you to enable remapping the memory above 4GB.
[Enabled] Enables the function.
[Disabled] Disables this function.
Graphics Conguration [Auto]
Allows you to select a primary display from iGPU, and PCIe graphical devices.
Primary Display [Auto]
Allows you to select which of the iGPU/PEG Graphics device should be the Primary
Display.
Conguration options: [Auto] [IGPU] [PCIE]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the
iGPU. Conguration options: [32M] [64M] [96M] [128M] ~ [448M] [480M] [512M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU
power use when idle. Conguration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable the iGPU Multi-Monitor. For Lucid Virtu MVP function supports,
set this item to [Enabled] to empower both integrated and discrete graphics. iGPU
shared system memory size is xed in 64MB.
Conguration options: [Disabled] [Enabled]
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST.
Conguration options: [Enabled] [Disabled]
Hot Plug [Disabled]
These items appear only when you set the SATA Mode Selection item to [AHCI] or [RAID],
and allow you to enable/disable SATA Hot Plug Support.
Conguration options: [Disabled] [Enabled]