Asus PA248CRV Series - Image Quality Settings

3-5ASUS PA248CRV Series LCD Monitor
3. Image
Set the image related setting from this menu.
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Preset
Palette
Blue Light Filter
Image
Sharpness
Trace Free
Aspect Control
Input Range
0
0
60
QuickFit Plus
Signal
PA248CRV
1920 x 1200_60Hz
• Sharpness: The adjusting range is from 0 to 100.
• Trace Free: Adjusts the response time of the monitor.
• Aspect Control: Adjusts the aspect ratio to Full, Dot to Dot or 1:1
Ratio.
• Input Range: To map signal range with whole black to white presented
range of display.
• Blue Light Filter: Adjust the strength of blue light filter.
To activate this function, you need to do the following: disable HDR on your
device.