2-2 Chapter 2: Setup
2.2 Detaching the arm/base (for VESA
wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Press the release button, and then detach the arm/base from the monitor
(Figure 1).
1
2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only with UL/CSA/GS Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 10.6 kg (23.37 Ib) (Screw size: M4 x 10
mm).
To Next Page
Loading...
