Asus PA329CRV Series - Chapter 3: OSD Menu Operations; How to Reconfigure OSD Settings

Chapter 3: General
instructions
3-1ASUS PA329CRV Series LCD Monitor
3.1 OSD (On-Screen Display) menu
3.1.1 How to reconfigure
PA329CRV
3840 x 2160_60Hz
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Preset
Palette
sRGB Mode
Adobe RGB Mode
Rec.2020 Mode
DCI-P3 Mode
Image
QuickFit Plus
PIP/PBP
Native Mode
HDR
DICOM Mode
Rec.709 Mode
1. Press any button to display the OSD menu.
2. Press the
Menu (5-way) button to enter the OSD main menu.
3. Move the
Menu (5-way) button up/down/left/right to navigate through the
functions. Highlight the desired function and press the Menu (5-way) button
to activate it. If the function selected has a sub-menu, move the
Menu (5-
way) button up/down to navigate through the sub-menu functions. Highlight
the desired sub-menu function and press the
Menu (5-way) button or
move the
Menu (5-way) button to activate it.
4. Move the
Menu (5-way) button up/down to change the settings of the
selected function.
5. To exit and save the OSD menu, press the
button or move the Menu
(5-way) left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-4.