Asus PA329CRV Series - OSD Function Introduction: Preset Modes

3-2 Chapter 3: OSD (On-Screen Display) menu
3.1.2 OSD function introduction
1. Preset
This function contains 10 sub-functions you can select for your preference.
Each mode has the Reset selection, allowing you to maintain your setting or
return to the preset mode.
PA329CRV
3840 x 2160_60Hz
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Preset
Palette
sRGB Mode
Adobe RGB Mode
Rec.2020 Mode
DCI-P3 Mode
Image
QuickFit Plus
PIP/PBP
Native Mode
HDR
DICOM Mode
Rec.709 Mode
• Native Mode
: Best choice for document editing.
• sRGB Mode: Compatible with sRGB color space, sRGB mode is the
best choice for document editing.
Energy star® cert done in native mode.
• Adobe RGB Mode: Compatible with Adobe RGB color space.
• Rec.2020 Mode: Compatible with Rec.2020 color space.
• DCI-P3 Mode: Compatible with DCI-P3 color space.
• DICOM Mode: Compatible with DICOM standard, best choice for
medical image checking.
• Rec. 709 Mode: Compatible with Rec. 709 color space.
• HDR: High Dynamic Range. Contains three HDR modes (PQ
Optimized, PQ Clip, and PQ Basic).
To activate this function, you need to do the following: turn off PIP/PBP.
For better HDR performance (to meet DisplayHDR standard), you need to do
the following: set Dynamic Dimming to Fast and HDR mode to PQ Clip.
• User Mode 1/User Mode 2: Allows you to make color adjustments
in the Advanced Setting.