Asus PA329CRV Series - OSD Image Settings

3-5ASUS PA329CRV Series LCD Monitor
3. Image
Set the image related setting from this menu.
PA329CRV
3840 x 2160_60Hz
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
QuickFit Plus
PIP/PBP
Preset
Palette
Blue Light Filter
Image
Sharpness
Trace Free
Aspect Control
Input Range
0
0
60
• Sharpness: The adjusting range is from 0 to 100.
• Trace Free: Adjusts the response time of the monitor.
To activate this function, you need to do the following: turn off PIP/PBP and
disable HDR on your device.
• Aspect Control: Adjusts the aspect ratio to Full, Dot to Dot or 1:1
Ratio.
To activate this function, you need to do the following: turn off
MediaSync
and
PBP
.
• Input Range: To map signal range with whole black to white presented
range of display.
• Blue Light Filter: Adjust the strength of blue light filter.
To activate this function, you need to do the following: disable HDR on your
device.