Asus PA32UCX Series User Manual

1-3ASUS PA32UCX Series LCD Monitor
• To change the hotkey function, go to the Shortcut > Shortcut 1 menu.
6. Shortcut
• Default: HDR hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 2 menu.
7. Power button/power indicator
• Turns the monitor on/off.
• The color denition of the power indicator is as the below table.
 
White On
Amber Standby mode
Off Off
 
1 2
3
54 6 7 98
 .
 . This port connects the power cord.
 . Press the switch to turn on/off power.
 .
 . These ports are for connection with an HDMI compatible device.
HDMI-1 port specially supports few uncertain HDMI1.4 EDID devices. Press
“Input Select” key for 5 seconds for optimal EDID.
 . This port is for connection with a DisplayPort compatible
device.
The default setting of DisplayPort Stream in the OSD menu is DisplayPort
1.2. You can change it to DisplayPort 1.1 when your device output signal is
DisplayPort 1.1.
 . This port is for service only.

Asus PA32UCX Series Specifications

General

Screen Size	32 inches
Resolution	3840 x 2160 (4K UHD)
Panel Type	IPS
Brightness	1000 cd/m² (peak)
Aspect Ratio	16:9
Refresh Rate	60 Hz
Contrast Ratio	1000:1
Viewing Angle	178°(H)/178°(V)
Color Depth	10-bit (1.07 billion colors)
Local Dimming Zones	1152
VESA Mount	100 x 100 mm
HDR	Dolby Vision, HDR10, HLG
Color Gamut	99.5% Adobe RGB, 100% sRGB
Ports	HDMI 2.0, DisplayPort 1.2, Thunderbolt 3, USB 3.1
Response Time	5ms (Gray to Gray)
Speakers	Yes
USB Hub	Yes
Adjustability	Height, Tilt, Swivel, Pivot
Weight	13.6 kg (with stand)