2-5ASUS PA32UCX Series LCD Monitor
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2. Arranging the cables:
We recommend that you follow the order below to route the cable through the
cable management slot on the stand.
1
3 3 3
26 5 5 4 4
4
3. Attach the input/output port cover if needed.
2.5 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.
To Next Page
Loading...
