Asus PA32UCX Series - System Setup

3-9ASUS PA32UCX Series LCD Monitor
 
Allows you to adjust the system.
HD R Pre v i ew
Ad a p tiv e - Syn c
Dy n a mic D imm i ng
Po w e r S a v ing
OS D Set u p
La n g uag e
Ca l i bra t i on R em ind e r
System Setup
ASUS PA 3 2 U C X
Standard M o d e D i s pl a y P o rt 3 8 40 x 2 16 0 @ 60 H z
 : Allow you to preview non-HDR content performance with
HDR10 color and brightness mapping format.
 (DisplayPort/Thunderbolt only): Allows an Adaptive-Sync
supported* graphics source to dynamically adjust display refresh rate
based on typical content frame rates for power efcient, virtually stutter
free and low-latency display update.
* Adaptive-Sync can only be activated within 40Hz ~ 60Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: turn off Motion Sync, turn
off PIP/PBP mode and set DisplayPort Stream to DisplayPort 1.2.
 : Synchronizes with contents while contrast
changing to execute backlight dynamic dimming. You can adjust the
synchronization speed as “Fast”, “Medium” or “Gradual”.
To activate this function, you need to do the following: turn off PIP/PBP.
 :
* “Normal Level” allows the USB downstream ports/Thunderbolt
ports to charge external devices when the monitor enters power
saving mode.
* “Deep Level” does not allow all ports to charge external devices
and keeps Thunderbolt and USB signals from being automatically
detected when the monitor enters power saving mode.
 :
* Adjusts the OSD timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from opaque to transparent.
* Adjusts the OSD rotation.