Asus PB40 - Quickly Enter the BIOS; Load Default BIOS Settings

ASUS Mini PC PB40 23
Quickly enter the BIOS
To quickly enter the BIOS:
• Pressthepowerbuttonforatleastfour(4)secondstoshutdownyour
Mini PC, then insert a straightened paper clip into the BIOS key slot, and
press the power button again to turn your Mini PC back on and enter
BIOS.
NOTE: POST (Power-On Self Test) is a series of software controlled
diagnostic tests that run when you turn on your Mini PC.
Load default BIOS settings
To load the default values for each of the parameters in your BIOS:
• EntertheBIOSbyfollowingthestepsmentionedinthe Quickly enter the
BIOS section.
• NavigatetotheExit menu.
• SelecttheLoad Optimized Defaults option, or you may press <F5>.
• SelectYes to load the default BIOS values.