3-1ASUS PG27AQ Series LCD Monitor
3.1 OSD (On-Screen Display) menu
1. Press the ( ) button to activate the OSD menu.
2. Move the ( ) button up/down to navigate through the functions.
Highlight the desired function and press the ( ) button to activate it. If
the function selected has a sub-menu, move the ( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the ( ) button or move the ( ) button
right to activate it.
3. Move the ( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the button or move the
( ) left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
In this function, you can adjust the blue light filter level.
MOVE/ENTER
BACK
EXIT
Normal Mode DisplayPort 3840 x 2160@ 60Hz
Racing Mode
ASUS ROG PG27A
Level o
Level 1
Level 2
Level 3
Level 4
Blue Light Filter
Color
Image
Input Select
System Setup
To Next Page
Loading...
