Asus PRIME Z390-P - HD Audio [Enabled]; LED Lighting [Breathing Mode]; Realtek LAN Controller [Enabled]; Super IO LED Control Switch [On]

The number of SSDs that can be detected varies with the congurations of the PCIe X16
slots.
HD Audio [Enabled]
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the HD Audio Device.
The following two items appear only when you set the HD Audio Controller item to
[Enabled].
LED Lighting [Breathing Mode]
This item allows you to set the audio shielding LED mode. Conguration options: [Disabled]
[Still Mode] [Breathing Mode]
Super IO LED Control Switch [On]
This item allows you to turn on/off the super IO LED control switch. Conguration options:
[Off] [On]
Realtek LAN Controller [Enabled]
[Enabled] Enables the Realtek LAN controller.
[Disabled] Disables the controller.
Realtek PXE OPROM [Disabled]
This item appears only when you set the previous item to [Disabled] and allows you to enable
or disable the PXE OPROM of the Realtek LAN controller. Conguration options: [Enabled]
[Disabled]
USB power delivery in Soft Off state (S5) [Enabled]
[Enabled] The USB port will provide power to your devices even when the
system is in Power State S5.
[Disabled] Disables this function.
Connectivity mode (Wi-Fi & Bluetooth) [Enabled]
This item allows you to enable or disable the Wi-Fi and Bluetooth connectivity module.
Conguration options: [Disabled] [Enabled]
M.2_1 Configuration [Auto]
M.2_1 shares SATA mode with SATA6G_2.
[Auto] Auto detects the M.2_1 device mode. If a SATA device is detected,
SATA6G_2 will be disabled.
[SATA] Only supports M.2_1 SATA devices. SATA6G_2 cannot be used in this
mode.
[PCIE] Only supports M.2_1 PCIE devices.
Serial Port Configuration
The sub-items in this menu allow you to set the serial port conguration.
2-34 Chapter 2: Getting started