EasyManua.ls Logo

Asus PRIME Z390-P - Chassis Fan(S) Configuration; CPU Fan Max. Duty Cycle(%) [100]; CPU Lower Temperature [20]; CPU Middle Temperature [25]

Asus PRIME Z390-P
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values
range from 20% to 100%. When the CPU temperature reaches the upper limit, the
CPU fan will operate at the maximum duty cycle.
CPU Middle Temperature [25]
Use the <+> or <-> keys to set the value for CPU Middle Temperature. The range of
the values depends on the CPU installed.
CPU Fan Middle Duty Cycle(%) [20]
Use the <+> or <-> keys to adjust the CPU fan middle duty cycle. The values range
from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan
operates at the maximum duty cycle.
CPU Lower Temperature [20]
Use the <+> or <-> keys to adjust the CPU fan’s lower temperature. The values range
from 0°C to 75°C.
CPU Fan Min. Duty Cycle(%) [20]
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values
range from 20% to 100%. When the CPU temperature is under the lower limit, the CPU
fan will operate at the minimum duty cycle.
Chassis Fan(s) Configuration
Chassis Fan(s) Q-Fan Control [Auto]
[Auto] Detects the type of chassis fan installed and automatically switch the
control modes.
[PWM mode] Enables the chassis Q-Fan control in PWM mode for 4-pin chassis
fan.
[DC mode] Enables the chassis Q-Fan control in DC mode for 3-pin chassis fan.
[Disabled] Disables the chassis Q-Fan control feature.
The following items appear only when you set the Chassis Fan 1/2 Q-Fan Control to [PWM
Mode] or [DC Mode].
Chassis Fan 1/2 Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Conguration options: [CPU] [Motherboard]
Chassis Fan 1/2 Step Up [0 sec]
This item allows you to select the value of Chassis Fan 1/2 Step Up. Conguration
options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec] [153 sec] [178
sec] [204 sec]
Chassis Fan 1/2 Step Down [0 sec]
This item allows you to select the value of Chassis Fan 1/2 Step Down. Conguration
options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec] [153 sec] [178
sec] [204 sec]
Chassis Fan 1/2 Speed Low Limit [200 RPM]
This item allows you to disable or set the chassis fan warning speed. Conguration
options: [Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
ASUS PRIME Z390-P 2-39

Table of Contents

Related product manuals