2-22
Chapter 2: Getting started
2.5.18 VCCIN Offset Mode Sign [Auto]
This item allows you to set the CPU input voltage. The values range from 0.010V to 0.600V
with a 0.010V interval when the VCCIN Offset Mode Sign is [+]. The values range from
0.010V to 0.250V with a 0.010V interval when the VCCIN Offset Mode Sign is [-].
2.5.19 DRAM Voltage [Auto]
Allows you to set the DRAM Voltage. The values range from 1.185V to 1.800V with a 0.005V
interval.
2.5.20 DRAM CTRL REF Voltage [Auto]
Allows you to set the DRAM CTRL REF Voltage. The values range from 0.3950V to 0.6300V
with a 0.0050V interval.
2.5.21 DRAM DATA REF Voltage on CHA [Auto]
Allows you to set the DRAM DATA REF Voltage on CHA. The values range from 0.3950V to
0.6300V with a 0.0050V interval
2.5.22 DRAM DATA REF Voltage on CHB [Auto]
Allows you to set the DRAM DATA REF Voltage on CHB. The values range from 0.3950V to
0.6300V with a 0.0050V interval
2.5.23 CPU Spread Spectrum [Auto]
[Auto] Automatic conguration.
[Disabled] Enhances the BCLK overclocking ability.
[Enabled] Sets to [Enabled] for EMI control.