Asus ROG GR8 II Series - Reinstalling Brackets

16
21. Replacethebrackets(A-C)andsecurethemwiththescrews
removedearlier.
Toreplacethebrackets:
A. Insertthebracketinthedirectiontowardsthefrontpanel,
thenpushtheendtowardstherearpaneldown.
NOTE: Ensurethecablesarecollectedandseatedintothespaceand
thegapatthebottomofthebracket.
B. Tiltthebracketsothatthetopofthebracketisinsertedrst
intothechassis,thenpushthebottomofthebracketso
thatthebracketisseatedrmlywithinthechassis.
C. Alignthebracket'sscrewholeswiththescrewholesonthe
chassisandreplacethebracket.