Asus ROG STRIX B760 Series - System Agent (SA) Configuration

38
ROG STRIX B760 Series BIOS Manual
7.3 System Agent (SA) Conguration
The items in this menu show the System Agent (SA) conguration options.
VT-d
Allows you to enable or disable VT-d function on MCH.
Conguration options: [Enabled] [Disabled]
The following item is accessible only when you set VT-d to [Enabled].
Control Iommu Pre-boot Behavior
Allows you to enable or disable Input/Output Memory Management Unit (IOMMU) in
Pre-boot environment. This requires that DMAR table is installed in DXE and VTD_
INFO_PPI is installed in PEI.
Conguration options: [Disable IOMMU] [Enable IOMMU during boot]
Memory Conguration
Allows you to congure the Memory Conguration parameters.
Memory Remap
Allows you to enable or disable Memory Remap above 4GB.
Conguration options: [Enabled] [Disabled]
Graphics Conguration
Allows you to congure the Graphics Conguration parameters.
Primary Display
Allows you to select which of CPU, PEG, or PCIE graphics devices should be Primary
Display. Conguration options: [Auto] [CPU Graphics] [PEG Slot] [PCIE]
iGPU Multi-Monitor
Allows you to enable or disable iGPU Multi-Monitor. Set this item to [Enabled] to
empower both integrated and discrete graphics for multi-monitor output. iGPU shared
system memory size will be xed at 64M. Conguration options: [Disabled] [Enabled]
DVMT Pre-Allocated
Allows you to select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by
the Internal Graphics Device. Conguration options: [32M] [64M] [96M] [128M] [160M]
[192M] [224M] [256M] [288M] [320M] [352M] [384M] [416M] [448M] [480M] [512M]