Asus ROG STRIX B760 Series - Page 62

62
ROG STRIX B760 Series BIOS Manual
Boot Logo Display
Conguration options: [Auto] [Full Screen] [Disabled]
[Auto] Automatically adjusts the boot logo size for Windows
®
requirements.
[Full Screen] Maximizes the boot logo size.
[Disabled] Hide the boot logo during the POST.
The following item appears when you set Boot Logo Display to [Auto] or [Full Screen].
POST Delay Time
Allows you to select a desired additional waiting time before the POST to easily enter
the BIOS Setup. It is only recommended to set the POST delay time during a normal
boot system boot. Conguration options: [0 sec] – [10 sec]
The following item appears only when you set Boot Logo Display to [Disabled] and Wait
For ‘F1’ If Error to [Enabled].
POST Report
Allows you to select a desired POST report waiting time.
Conguration options: [1 sec] – [10 sec] [Until Press ESC]
Bootup NumLock State
Allows you to enable or disable power-on state of the keyboard NumLock.
Conguration options: [On] [Off]
Wait For ‘F1’ If Error
Allows your system to pause until the <F1> key is pressed when any error occurs.
Conguration options: [Disabled] [Enabled]
Option ROM Messages
Conguration options: [Force BIOS] [Keep Current]
[Force BIOS] The option ROM messages will be displayed during the POST.
[Keep Current] Only the ASUS logo will be shown during the POST.
Interrupt 19 Capture
Allows you to enable or disable the option ROMs to trap the interrupt 19.
Conguration options: [Disabled] [Enabled]
AMI Native NVMe Driver Support
Allows you to enable or disable AMI Native NVMe driver.
Conguration options: [Disabled] [Enabled]
Setup Mode
Allows you to select the default setup mode of the BIOS after POST.
Conguration options: [Advanced Mode] [EZ Mode]
Boot Sector (MBR/GPT) Recovery Policy
Allows you to select the Boot Sector Policy.
Conguration options: [Auto Recovery] [Local User Control]