1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor
To assemble the monitor:
• While assembling the monitor arm/base, we recommend
that you keep the monitor inside its EPS (Carton box)
packaging.
1. Take out all accessory from the upside EPS.
2. Take out upside EPS from carton box and then push open stand
assembly hole.
1
2
3. Align the screw hole on the monitor with the bundled screw on the
arm. Then insert the arm into the monitor.
3.1 Install the arm.
3.2 Fasten the bundled screw.
3.2 Cover the VESA cover.
To Next Page
Loading...
