Asus ROG Strix Z390-I Gaming - APM Configuration; PCI Subsytem Settings

3-18
Chapter 3: BIOS Setup
Chapter 3
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers. Conguration options:
[Disabled] [Enabled]
LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state. Conguration options: [On] [Off]
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states. Conguration options: [On] [Off]
USB power delivery in Soft Off state (S5)
[Enabled] The USB port will provide power to your devices even when the system is
in Power State S5.
[Disabled] Disables this function.
Connectivity mode (Wi-Fi & Bluetooth)
This item allows you to enable or disable the Wi-Fi and Bluetooth connectivity module.
Conguration options: [Disabled] [Enabled]
M.2_1 Conguration
[Auto] Automatically detects the M.2 device mode. If a SATA device is detected,
SATA6G_2 port will be disabled.
[SATA] Supports M.2_1 SATA devices only. SATA6G_2 port will be disabled.
[PCIE] Supports M.2_1 PCIe devices only.
3.6.8 APM Conguration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready
for ErP requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
3.6.9 PCI Subsytem Settings
SR-IOV Support
This item allows you to enable or disable the Single Root IO Virtualization support if your
system has SR-IOV capable PCIe devices. Conguration options: [Disabled] [Enabled]