Asus ROG Strix Z390-I Gaming - USB Configuration; Network Stack Configuration; Nvme Configuration; HDD;SSD SMART Information

ROG STRIX Z390-I GAMING
3-19
Chapter 3
3.6.10 USB Conguration
The items in this menu allow you to change the USB-related features.
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.1.2 Motherboard layout for the location of the USB ports.
3.6.11 Network Stack Conguration
The items in this menu allow you to congure Ipv4 / Ipv6 PXE support.
3.6.12 NVMe Conguration
This menu displays the NVMe controller and Drive information of the connected devices.
3.6.13 HDD/SSD SMART Information
The items in this menu display the SMART information of the connected devices.
3.7 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Q-Fan Conguration
Qfan Tuning
Click this item to automatically detect the lowest speed and congure the minimum
duty cycle for each fan.
AIO PUMP Control
[Disabled] Disable the AIO Pump control feature.
[Auto] Detects the type of AIO pump installed and automatically switches the
control modes.
[DC mode] Enable the AIO Pump control in DC mode for 3-pin fan.
[PWM mode] Enable the AIO Pump control in PWM mode for 4-pin fan.