3-1
ASUS LCD Monitor PG Series
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
You can either use the remote control or the Control buttons on the monitor to
navigate through the menu and make adjustments.
Enter
Back
Input Select
Racing Mode
ROG Swift PG38UQ HDR OFF
DisplayPort 3840x2160 120Hz
GameVisual
Racing Mode
Input Select
HDMI-2
HDR
OFF
3840 x 2160 | 144Hz
Gaming
Image
Color
Exit
Variable OD
Level 5
Level 4
Level 3
Level 2
Level 1
OFF
GamePlus
GameVisual
Shadow Boost
ELMB/ELMB SYNC
VRR
Volume 50
To navigate through the menu and make adjustments using the remote
control, do the following:
1. Press the Enter button to activate the OSD menu.
2. Move the Navigation button up/down to navigate through the
functions. Highlight the desired function and press the Enter button
to activate it. If the function selected has a sub-menu, move the
Navigation button up/down again to navigate through the sub-menu
functions. Highlight the desired sub-menu function and press the
Enter button or move the Navigation button right to activate it.
3. Move the Navigation button up/down to change the settings of the
selected function.
4. To exit and save the OSD menu, move the Navigation button left
repeatedly until the OSD menu disappears. To adjust other functions,
repeat steps 1 to 3.