8
English
Connect to the wireless network
There are two ways for your wireless clients (notebook, tablet PC, smartphone
and so on) to connect to RT-ACRH13 wireless network.
Connect to the wireless network manually
To connect to the wireless network manually:
1. Enable the Wi-Fi function on your wireless client to scan for available wireless
networks.
2. Select the SSID or network name that you assigned to your RT-ACRH13 net-
work.
3. Enter the password and click Connect.
Connect to the wireless network through WPS
RT-ACRH13 has a WPS (Wi-Fi Protected Setup) button for you to connect your
wireless client to RT-ACRH13 network without entering password.
To connect to the wireless network through WPS:
1. Press the WPS button at the back of RT-ACRH13. Refer to the section A quick
look for the location of the WPS button).
2. Press the WPS button of your wireless client within two minutes or follow the
WPS instructions that came with the wireless client. When connecting via
WPS, the WPS LED on your router blinks fast.
3. Wait until your router’s WPS LED turns into a solid light indicating a success-
fully connection between your router and your wireless client.
NA11652-RT-AC58U_QSG_V2.indb 8 2016-06-28 15:11:02
To Next Page
Loading...
