Asus RT-AX58U V2 - User Manual

RT-AX58U V2
AX3000 Dual-band Wi-Fi Router
Quick
Start Guide
Hardware Explanations
I/O Ports Overview LED Lights Overview
DC Power adapter DC Output: +12V with 2A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
One Router Setup Steps
Prepare your Modem
01
1
Unplug the power of cable / DSL modem. If it
has a battery backup, remove the battery.
5
[App] Launch ASUS Router App and follow
the instructions to complete the setup.
WE SUGGEST...
Modem back
Unplug
Install your Router
02
1
Plug the adapter into the DCIN port, and press the Power switch.
2
Connect your modem to WAN port at the back side of the router with
the network cable provided.
3
Power on the modem. Plug modem to the power outlet and power on.
Modem back
4
Check the modem LED lights to ensure the connection is active.
If you are using DSL for
internet, you will need
your username / password
from your Internet service
provider (ISP) to properly
configure your router.
Modem front
– Or via web browser
3
[Wired] Connect your PC to LAN port at the
back side of the router using an additional
network cable.
[Wireless] Connect to the network with default SSID shown
on the product label on the back side of your router “ASUS_
XX”.
4
[Wired / Wireless] Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://router.asus.com.
Follow the instructions to complete the setup.



– Via app
3
[App] On your iOS or Android mobile device, go
to the app store, search forASUS Router, and
download the app.
4
[App] On your iOS or Android mobile device, tapSettings > Wi-Fi,
connect to the default network SSID shown on the product label on
the back side of the router. Or scan the QR code on the product label
to connect the default network SSID.
* XX refers to the last two
digits of MAC address. You
can find it on the label on the
back of your router.

_



LANWAN
2.4GHz
5GHz
POWER
2
The power LED will light up when the hardware is ready.
DCIN port
LAN ports 1-4
WAN port
Reset button
USB 3.2 Gen1 port
Power
button
WPS button

Summary

Hardware Explanations

I;O Ports Overview

Diagram and labels for the router's input and output ports.

LED Status Indicators

Explanation of the different LED lights on the router and their meanings.

Technical Specifications

Key technical specifications including power requirements and operating conditions.

Router Setup Guide

Modem Preparation

Steps to prepare your existing modem before connecting the new router.

Router Installation

Physical connection and powering on the ASUS RT-AX58U V2 router.

Setup via ASUS Router App

Configure your router using the dedicated mobile application for iOS and Android.

Setup via Web Browser

Access the router's web interface to complete the network setup.

Asus RT-AX58U V2 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Maximum Data Rate	3000 Mbps
LAN Ports	4 x Gigabit LAN
WAN Ports	1 x Gigabit WAN
USB Ports	1 x USB 3.2 Gen 1
RAM	512MB
Flash Memory	256MB
MU-MIMO	Yes
Beamforming	Yes
OFDMA	Yes
AiProtection	Yes
Security	WPA3, WPA2, WPA
Antennas	4 x External Antennas
Weight	538 g
Frequency Band	2.4 GHz / 5 GHz
Wireless Speed	574 Mbps on 2.4GHz, 2402 Mbps on 5GHz
VPN Support	Yes