Asus TUF-AX3000 V2 User Manual




TUF-AX3000 V2
TUF Gaming AX3000 V2
Dual Band WiFi 6 Router
Quick
Start Guide
Hardware Explanations
I/O Ports Overview LED Lights Overview
DC Power adapter DC Output: +12V with 1.5A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
Router Setup Steps



USB 3.2 Gen 1x1 port
LAN 1~4 ports
2.5G/1G WAN (Internet) LED
2.4GHz LED
5GHz LED
Power LED
Prepare your Modem
01
1
Unplug the power of cable / DSL modem.
5
[App] Launch ASUS Router App and follow
the instructions to complete the setup.
Modem back
Unplug
Install your Router
02
1
Plug the adapter into the DCIN port, and press the Power button.
2
Connect your modem to WAN port at the back side of the router with the
network cable provided.
3
Power on the modem. Plug modem to the power outlet and power on.
Modem back
4
Check the modem LED lights to ensure the connection is active.
If you are using DSL for internet, you will
need your username / password from
your Internet service provider (ISP) to
properly congure your router.
Modem front
– or via Web Browser
3
[Wired] Connect your PC to a LAN port at the back
side of the router using an additional network cable.
[Wireless] Connect to the network with default SSID shown on the product label on the back side of your
router “ASUS_XX”.
4
[Wired / Wireless] Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not, navigate to http://router.asus.com.
Follow the instructions to complete the setup.
– via App
3
[App] On your iOS or Android mobile device, go to the app
store, search forASUS Router, and download the app.
4
[App] On your iOS or Android mobile device, tapSettings > Wi-Fi, connect
to the default network SSID shown on the product label on the bottom
side of the router. Or scan the QR code on the product label to connect the
default network SSID.
2
The power LED will light up when the hardware is ready.

_
* XX refers to the last two
digits of MAC address.
You can nd it on the
label on the back of
your router.
LAN 1~4 LEDs
Power (DCIN) port
Power button 2.5G/1G WAN (Internet) port
WPS button
Reset button
E19605_TUF-AX3000_V2_one-page_QSG.indd 1
E19605_TUF-AX3000_V2_one-page_QSG.indd 1
2022/2/22 11:05:07
2022/2/22 11:05:07

Asus TUF-AX3000 V2 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Frequency Bands	2.4 GHz, 5 GHz
Maximum Data Rate	3000 Mbps
LAN Ports	4 x Gigabit LAN
WAN Ports	1 x Gigabit WAN
USB Ports	1 x USB 3.2 Gen 1
Antenna	4 x External Antennas
MU-MIMO	Yes
Beamforming	Yes
RAM	512 MB
Flash Memory	256 MB
Wi-Fi Speed	574 Mbps (2.4GHz) + 2402 Mbps (5GHz)
Security	WPA3, WPA2-PSK, WPA-PSK, WPA-Enterprise, WPA2-Enterprise
Features	AiMesh, Adaptive QoS, VPN support

Summary

ASUS TUF-AX3000 V2 Quick Start Guide

Hardware Overview

Explains the router's I/O ports and LED indicators for hardware identification.

Prepare Your Modem for Setup

Unplug the modem, connect it to the router's WAN port, power it on, and verify modem lights.

Install and Power On Router

Plug the adapter into the DCIN port, press the power button, and observe the power LED indicator.

Router Setup via App or Web Browser

Guides for setting up the router using the ASUS Router app or a web browser interface.

Advanced Setup: Link Aggregation

Link Aggregation Preparation & Configuration

Connect client to LAN ports and configure Link Aggregation via the router's web GUI.

Product Support and Safety Information

Frequently Asked Questions (FAQ)

Answers common user questions and provides links to ASUS support resources.

General Product Safety Precautions

Covers operating temperature, placement, liquids, ventilation, damaged parts, and electrical shock hazards.

Radio Frequency (RF) Exposure Compliance

Details compliance with RF exposure limits and minimum separation distances for safe operation.