Asus TUF-AX5400 User Manual (English)

To Next Page







TUF-AX5400

TUF Gaming AX5400 Dual

Band Wi-Fi 6 Router

Quick

Start Guide

Hardware Explanations

I/O Ports Overview LED Lights Overview

DC Power adapter DC Output: +12V with 2.5A current

Operating Temperature 0~40

C Storage 0~70

Operating Humidity 50~90% Storage 20~90%

Specications:

One Router Setup Steps

WE SUGGEST...







Power (DCIN) port

Power button

USB 3.2 Gen 1 port

LAN 1~4 ports

WAN (Internet) port

WPS button

WAN (Internet) LED

5GHz LED

2.4GHz LED

Power LED

Reset button

Prepare your Modem

Unplug the power of cable / DSL modem. If it has a battery

backup, remove the battery.

[App] Launch ASUS Router App and follow

the instructions to complete the setup.

Modem back

Unplug

Install your Router

Plug the adapter into the DCIN port, and press the Power button.

Connect your modem to WAN port at the back side of the router with the

network cable provided.

Power on the modem. Plug modem to the power outlet and power on.

Modem back

Check the modem LED lights to ensure the connection is active.

If you are using DSL for internet, you will

need your username / password from

your Internet service provider (ISP) to

properly congure your router.

Modem front

– or via Web Browser

[Wired] Connect your PC to LAN port at the back side

of the router using an additional network cable.

[Wireless] Connect to the network with default SSID shown on the product label on the back side of your

router “ASUS_XX”.

[Wired / Wireless] Open a web browser.

You will be redirected to the ASUS Setup Wizard. If not, navigate to http://router.asus.com.

Follow the instructions to complete the setup.

– via App

[App] On your iOS or Android mobile device, go to the app

store, search forASUS Router, and download the app.

[App] On your iOS or Android mobile device, tapSettings > Wi-Fi, connect

to the default network SSID shown on the product label on the bottom

side of the router. Or scan the QR code on the product label to connect the

default network SSID.

The power LED will light up when the hardware is ready.



_

* XX refers to the last two

digits of MAC address.

You can nd it on the

label on the back of

your router.

LAN 1~4 LEDs

Need help?

Do you have a question about the Asus TUF-AX5400 and is the answer not in the manual?

Asus TUF-AX5400 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Maximum Data Rate	5400 Mbps
Antenna	6 x External Antennas
MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
RAM	512 MB
Flash Memory	256 MB
Frequency Bands	2.4 GHz, 5 GHz
Security	WPA3
Processor	1.5 GHz
AiProtection	AiProtection Pro
Gaming Features	Mobile Game Mode
Ports	1 x RJ45 for WAN, 4 x RJ45 for LAN