Asus RT-N600 - Page 79

79
• IfthereisstillnoInternetaccess,trytorebootyourcomputer
and verify the network’s IP address and gateway address.
• CheckthestatusindicatorsontheADSLmodemandthe
wireless router. If the WAN LED on the wireless router is not ON,
check if all cables are plugged properly.
How to restore the system to its default settings?
• GotoAdministration > Restore/Save/Upload Setting, and
click Restore.
The following are the factory default settings:
 • User Name: admin
 • Password: admin
 • Enable DHCP: Yes (if WAN cable is plugged in)
 • IP address: 192.168.50.1
 • Domain Name: (Blank)
 • Subnet Mask: 255.255.255.0
 • DNS Server 1: 192.168.50.1
 • DNS Server 2: (Blank)
 • SSID (2.4GHz) and SSID (5GHz) settings:
  • For USA and Canada:
   •SSID (2.4GHz): Refer to the label at the bottom of
the router
   •SSID (5GHz): Refer to the label at the bottom of
the router