EasyManuals Logo

Asus SABERTOOTH 990FX R2.0 User Manual

Asus SABERTOOTH 990FX R2.0
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #92 background imageLoading...
Page #92 background image
3-22
Chapter 3: BIOS setup
Chapter 3
You can only set SATA Port5-Port6 to [IDE] if Port1-Port4 is set to [IDE].
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a
monitor system. When read/write of your hard disk errors occur, this feature
allows the hard disk to report warning messages during the POST.
Conguration options: [Disabled] [Enabled]
SATA ESP on PORT1-6 [Disabled]
Allows you to set SATA port on PORT1-6 to external SATA port.
Conguration options: [Disabled] [Enabled]
3.5.5 USB Conguration
The items in this menu allow you to change the USB-related features.
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Enables Legacy USB support. AUTO
option disables legacy support if no
USB devices are connected. DISABLE
option will keep USB devices
available only for EFI applications.
Back Advanced\ USB Conguration >
UEFI BIOS Utility - Advanced Mode
USB Conguration
USB Devices:
1 Keyboard, 1 Mouse, 2 Hubs
Legacy USB Support Enabled
Legacy USB3.0 Support Enabled
EHCI Hand-off Disabled
> SB USB Conguratuin
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating systems (OS).
[Disabled] The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Legacy USB3.0 Support [Enabled]
[Enabled] Enables the support for USB 3.0 devices on legacy operating systems
(OS).
[Disabled] Disables the function.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus SABERTOOTH 990FX R2.0 and is the answer not in the manual?

Asus SABERTOOTH 990FX R2.0 Specifications

General IconGeneral
Non-ECCYes
Memory channelsDual-channel
Memory slots typeDIMM
Number of memory slots4
Supported memory typesDDR3-SDRAM
Maximum internal memory32 GB
Supported memory clock speeds1066, 1333, 1600, 1866 MHz
System bus rate5.2 GT/s
Processor socketSocket AM3+
Processor manufacturerAMD
Compatible processor seriesAMD Phenom FX, AMD Phenom II X2, AMD Phenom II X3, AMD Phenom II X4, AMD Phenom II X6, AMD Phenom II X8
Maximum number of SMP processors1
USB 2.0 connectors2
Number of SATA III connectors8
Number of Parallel ATA connectors-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports0
Audio chipRealtek ALC892
Cooling typePassive
Component forPC
Motherboard chipsetAMD 990FX
Audio output channels7.1 channels
Motherboard form factorATX
Motherboard southbridgeAMD SB950
RAID levels0, 1, 5, 10
Supported storage drive interfacesSATA III
On-board graphics cardNo
Parallel processing technology supportQuad-GPU CrossFireX, Quad-GPU SLI
PCI Express slots version2.0
PCI Express configurations1x1, 1x4, 1x16, 2x8, 2x16
PCI Express slots quantity5
Controller 2nd interface typeASMedia PCIe SATA
Trial softwareAntivirus
Cables includedCrossFire, SATA
Bundled softwareASUS Update\\r ASUS Utilities
LAN controllerRealtek RTL8111F
Ethernet interface typeGigabit Ethernet
BIOS typeUEFI
ACPI version2.0a
BIOS memory size64 Mbit
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width305 mm

Related product manuals