Asus ST467 - User Manual

Questions and Answers

B
Bruce JamesAug 10, 2025
Why does my Asus ST467 Monitor have no picture?
- J
  Jessica RussellAug 11, 2025
  If your Asus Monitor displays no picture, here are a few things to check: * Make sure the monitor is turned on by checking the power indicator. * Ensure the signal source device (like your computer) is turned on. * Check all cable connections to ensure they are firmly connected. * Verify that your computer's output resolution is supported (refer to page 49 for supported resolutions). * Also, check the output resolution of your DVD or Blu-ray player, ensuring it's supported (refer to page 49).
D
David WellsAug 18, 2025
How to fix no sound on Asus ST467 Monitor?
- M
  Mark RamirezAug 18, 2025
  If you're not getting any sound from your Asus Monitor, first, make sure that the mute function is turned off both on the display and the input source device. Increase the audio volume level if needed. Also, check that all cable connections are firmly connected.
J
jeremy31Aug 25, 2025
What to do if computer input image looks strange on Asus ST467 Monitor?
- K
  Kathryn BowersAug 26, 2025
  If the computer input image on your Asus Monitor looks strange, try the following: 1. Ensure your computer's output resolution is supported (refer to page 49). 2. Use the Auto Adjustment function (refer to page 42) to automatically optimize the display. 3. If auto-adjustment isn't satisfactory, manually adjust the image using the Clock Frequency, Phase, H. Position, and V. Position functions.
C
Courtney SpencerSep 3, 2025
What to do if the Asus Monitor remote control does not work?
- M
  Megan MontgomerySep 3, 2025
  If the remote control for your Asus Monitor isn't working, try these steps: * Ensure the remote control function isn't locked; unlock it and try again. * Verify the batteries are correctly oriented and not dead; replace if necessary. * Make sure you're within range and pointing the remote at the display's sensor window. * Check for obstructions between the remote and the sensor. * Ensure the sensor window isn't under strong lighting or direct sunlight. * Turn off infrared functions on nearby devices like computers or PDAs to prevent interference.