Connection16
Connecting the YPbPr component video input
1. Connect the VIDEO IN (YPbPr) jacks on the display to the component output jacks on
an A/V device (such as a VCR or DVD player) using a component video cable.
2. Connect the A/V device’s audio output jacks to the AUDIO IN (AUDIO 2) jacks on the
display using a suitable audio cable. To select an appropriate audio source, see "Audio
Source" on page 40 for details.
3. To view video image from this input, press the YPbPr button on the remote control, or
select YPbPr from the source selection bar.
Note:
• The cables are not supplied and should be purchased separately.
To Next Page
Loading...
