Network connection30
Mail Report
The Mail Report page provides options for configuring email server settings for sending
status or alert reports from the display.
Configuring mail server settings
The mail server settings must be correctly configured for the display to send email
messages.
1. Specify the recipient’s and sender’s email addresses and email subject under Email
Setting.
2. Obtain the server address, user name and password information from your email
server administrator and enter them in the corresponding fields under SMTP Setting.
3. If you want the display to send a status report periodically, check the Status Report
chceckbox and specify the time and day of the week when the report will be sent.
4. Click the Submit button to complete setup. You can also click the E-Mail Test button to
set the display to send a test email for verification.
To Next Page
Loading...
Need help?
General