3-6
Chapter 3: General Instructions
• Power Indicator: Turn the power LED indicator on/off.
• Power Key Lock: Enables or disables the power key.
• Power Setting:
* Standard Mode: Normal power consumption.
* Power Saving Mode: Reduces power consumption.
The monitor brightness can only be lowered when Power Saving Mode is
selected. If you wish to increase the brightness, choose Standard Mode or
perform All Reset.
• Key Lock: To disable all function keys. Press over 5 seconds to
cancel the key lock function.
• OSD Setup:
* Adjusts the OSD timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from opaque to transparent.
• DisplayPort Stream: Compatibility with graphic card. Select DisplayPort
1.1 or DisplayPort 1.2 by graphic card DP version.
DisplayPort 1.1 is only available when OverClocking and Adaptive-Sync
(DP)/ Variable Refresh Rate are off.
• Information: Shows the monitor information.
• All Reset: “Yes” allows you to restore the default settings.
To Next Page
Loading...
