Asus TUF X299 MARK 1 - Chapter 2: Basic Installation; 2.1 Building your PC system

ASUS TUF X299 MARK 1
2-1
Chapter 2
Basic Installation
2
Chapter 2: Basic Installation
2.1 Building your PC system
The diagrams in this section are for reference only. The motherboard layout may vary with
models, but the installation steps are the same for all models.
2.1.1 Motherboard installation
1. Install the ASUS Q-Shield to the chassis rear I/O panel.
2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to
the chassis’ rear I/O panel.