Asus TUF X299 MARK 1 - Page 69

ASUS TUF X299 MARK 1
3-11
Chapter 3
5. AfterselectingthetypeofRAID,clickNextthenclickYestocontinuetheRAIDsetup.
6. AftertheRAIDsetupisdone,clickYestoexitthesetupthenclickOKtoresetyour
system.
YoucanonlyselectEasyBackup(RAID10)ifyouconnectfour(4)HDDs.
b. ForSuperSpeed,clickNextthenselectfromSuper Speed (RAID 0)orSuper
Speed (RAID 5).
a. ForEasyBackup,clickNextthenselectfromEasy Backup (RAID 1)orEasy
Backup (RAID 10).
4. SelectthetypeofstorageforyourRAID,Easy BackuporSuper Speed,thenclick
Next.