Asus TUF Z370-PLUS GAMING - 3.7 Monitor Menu; CPU Temperature; MotherBoard Temperature

ASUS TUF Z370-PLUS GAMING
3-29
Chapter 3
USB Keyboard and Mouse Simulator
Enable this item to simulate USB keyboard and mouse to PS/2 module in Windows 7. Ensure
to install USB driver in your system before you disable this item. Conguration options:
[Disabled] [Enabled]
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.1.2 Motherboard layout for the location of the USB ports.
3.7 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
CPU Temperature / MotherBoard Temperature [xxx°C/xxx°F]
The onboard hardware monitor automatically detects and displays the CPU and MotherBoard
temperatures. Select [Ignore] if you do not wish to display the detected temperatures.
Q-Fan Configuration
The subitems in this menu allows you to congure the Q-Fan features.
Qfan Tuning
Click this item to automatically detect the lowest speed and congure the minimum duty cycle
for each fan.
CPU Q-Fan Control
[Auto] Detect the type of CPU fan installed and automatically switch the control
modes.
[PWM Mode] Enable the CPU Q-Fan control in PWM mode for 4-pin CPU fan.
[DC Mode] Enable the CPU Q-Fan control in DC mode for 3-pin CPU fan.
[Disabled] Disables the CPU Q-Fan control feature.
CPU Fan Speed Lower Limit [200 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows you
to disable or set the CPU fan warning speed. Conguration options: [Ignore] [100RPM]
[200RPM] [300 RPM] [400 RPM] [500 RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo] Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.