Asus VB198TL - VESA Mount Installation Prep; Detaching the Monitor Stand

2-2 Chapter2:Setup
2.2 Detaching the arm/stan(for VESA wall
mount)
ThedetachablestandoftheVB178(x)L/VB198(x)LSeriesLCDmonitoris
speciallydesignedforVESAwallmount.
To detach the arm/stand:
1. Havethefrontofthemonitorfacedownonatable.
2. UseascrewdrivertoremovethefourscrewsontheVESAcover,theslideout
thearm/basetodetachitfromthemonitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damagetothemonitor.
• Holdthestandofthemonitorwhenyouremovethescrews.
1
• TheVESAwallmountkit(100mmx100mm)ispurchasedseparately.
• ForuseonlywithULListedWallMountBracketwithminimumweight/load
10Kg(Screwsize:4mmx12mm)