Asus VE228H - Setup Procedures; Assembling the Monitor Base; Adjusting Monitor Angle

2-1ASUSVE228SeriesLEDMonitor
2.1 Assembling the monitor base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Assemblethebaseandthearmbyaligningthearrowmarksonthebaseand
the arm.
3. Fixthebasetothearmbyfasteningthebundledscrew.
Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damage to the monitor.
1
Re lea se L oc k
2
2.2 Adjusting the monitor
• Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe
monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.
• Holdthestandtopreventthemonitorfromfallingwhenyouchangeitsangle.
• Therecommendedadjustingangleisfrom-5˚to20˚.
-5˚~20˚
Itisnormalthatthemonitorslightlyshakeswhileyouadjustthetheviewing
angle.