Asus VG32U Series - Adjusting the Monitor; Detaching the Arm (for VESA Wall Mount)

2-1
ASUS TUF Gaming Monitor VG32U Series
2.2 Adjusting the monitor
• Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe
monitor,thenadjustthemonitortotheanglethatismostcomfortable
for you.
• Holdthestandtopreventthemonitorfromfallingwhenyouchangeits
angle.
• Therecommendedadjustingangleis-5˚to15˚.
-5°~+15°
• Itisnormalthatthemonitorslightlyshakeswhileyouadjusttheviewingangle.
2.3 Detaching the arm (for VESA wall mount)
Thedetachablearm/baseofthismonitorisspeciallydesignedforVESA
wall mount.
Todetachthearm/base:
1. Have the front of the monitor face down on a table.
2. Removetherubbersinthefourscrewholes.(Figure1)
3. Removethebase.(Figure2)
4. Useascrewdrivertoremovethescrewonthehinge(Figure3),then
removethehinge.
(Figure1)
2
1
2
1
(Figure2)
(Figure3)