Asus VG32U Series - OSD Function Introduction

3-2
Chapter 3: General Instruction
3.1.2 OSD function introduction
1. Gaming
Gaming
Image
Color
Input Select
PIP/PBP Setup
ASUS TUF GAMING
VG32UQA1A Racing Mode144Hz
3840x2160
GameVisual
HDMI-1
Input Source
OFF
HDR
Back Enter Exit
Overclocking
Variable OD
Variable Refresh Rate
ELMB
GamePlus
GameVisual
Shadow Boost
• Overclocking:
* ON:Thisfunctionallowsyoutoadjusttherefreshrate.
* Max Refresh Rate:Allowsyoutoselectamaximumrefreshrate
of160Hz.Afterselecting,pressthe ( ) button to activate
thesetting.
• Overclockingmaycausescreenflickering.Toreducesucheffects,
disconnect the DisplayPort cable and use the monitor OSD menu to try
againwithasaferMax.Refreshrate.
• Variable OD:SpeedsuptheresponsetimebyOverDrive
technology.IncludingLevel0~Level5.
• Variable Refresh Rate:AllowsanAdaptive-Syncsupported
graphicssourcetodynamicallyadjustdisplayrefreshratebased
on typical content frame rates for power efficient, virtually stutter
free and low-latency display update.
• Variable Refresh Ratecanonlybeactivatedwithin48Hz~160Hzforboth
HDMI and DisplayPort.
• For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures..
• ELMB SYNC:AllowsyoutoturnonthefunctionwhenVariable
Refresh Rate is On.Thisfunctioneliminatesscreentearing,
reducesghostingandmotionblurwhenplayinggames.