1. button:
Selects a desired preset mode.•
Exits the OSD menu or goes back to the previous menu when the OSD •
menu is active.
Automatically adjusts the image to its optimized position, clock, and phase •
by pressing this button for 2-4 seconds (for VGA mode only).
2.
Decreases values or moves your selection left/down. •
Activates the QuickFit function.(Please refer to 1.4.3 QuickFit Function).•
3. MENU button:
Turns on the OSD menu. Enacts the selected OSD menu item. •
4.
Increases values or moves your selection right/up. •
Brightness hotkey•
To Next Page
Loading...
